✔ Energy-Saving PIR Motion Sensor – Automatically switches on/off based on motion detection.
✔ Wide 180° Detection Range – Covers 5-12m distance, adjustable for different spaces.
✔ Intelligent Day & Night Detection – Works only in the dark or in all lighting conditions based on settings.
✔ Adjustable Sensitivity & Time Delay – Customize detection distance and shut-off timing (10 sec to 8 min).
✔ High Load Capacity – Supports 1200W incandescent and 300W energy-saving lamps.
✔ Durable & Reliable – Works in temperatures from -20°C to +40°C with low power consumption.
✔ Easy Installation – Simple setup with clear wiring instructions for home and commercial use.
🔹 Upgrade to smart lighting today! Order now for convenience, safety, and energy savings!
SPECIFICATION:
Power Source: 220 -240V/AC
Detection Range: 180°
Power Frequency: 50Hz
Working Temperature: -20~+40℃
Ambient Light: 3-2000LUX (adjustable)
Working Humidity: <93%RH
Time-Delay: min: 10sec±3sec
Installation Height: 1.8m~2.5m
max: 8min±2min
Power Consumption: 0.45W (work)
Rated Load: 1200W (incandescent lamp) 0.1W (static)
300W(energy-saving lamp)
Detection Motion Speed：0.6~1.5m/s
Detection Distance: 5-12m (<24℃) (adjustable)
FUNCTION :
➢ Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
➢ SENS adjustable: It can be adjusted according to using location; low sensitivity with 5m for
detection distance; high sensitivity with 12m, it fits for large room.
➢ Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic (set time).
➢ Time-delay adjustment: It can be set according to the consumer’s desire. The minimum time is 10sec±3sec. The maximum is 8min±2min.
INSTALLATION :
➢ Switch off the power.
➢ Screw off the nail on the front cover. Open the wire hole. The power wire and the load wire are bored in the bottom.
➢ Fix the bottom on the selected position with the inflated screw.
➢ Connect the power and the load with the connection-wire column according to the connect-wire figure as following part.
➢ Fix the front cover of sensor, please screw the nail and switch on the power. So you can test it.
Brand: Planet Car Care
MRP: Rs 1500(inclusive of all taxes)
USP: N/A
Net Quantity: 1 Unit
Generic Name: Motion sensor
Country of Origin: PRC
Imported by: Planet Co. A28, Sector 7, Dwarka, New Delhi 110075
Customer Care: 7217668355
support@planetcarcare.com